Air Flow Meter/Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Mass Airflow Sensor with Intake Air Temperature Sensor Replacement

Removal Procedure

1. Disconnect the engine wiring harness electrical connector (1) from the mass air flow (MAF)/intake air temperature (IAT) sensor (2).

2. Remove the MAF/IAT sensor screws (1).
3. Remove the MAF/IAT sensor (2).

Installation Procedure

1. Install the MAF/IAT sensor (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the MAF/IAT sensor screws (1) and tighten to 2.5 Nm (22 lb in).

3. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor (2).