Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2012 >> Traverse AWD V6-3.6L >> Repair and Diagnosis >> Maintenance >> Fluids >> Fluid - Transfer Case >> Service and Repair

Fluid - Transfer Case: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches



Transfer Case Fluid Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.




2. Remove the drain plug.




3. Remove the fill plug.

Installation Procedure




1. Clean the drain plug.

Caution: Refer to Component Fastener Tightening Caution Component Fastener Tightening Caution.

2. Install the drain plug and tighten to 39 Nm (29 lb ft).




3. Fill the transfer case with lubricant to the bottom of the fill plug, or 1 Liter (34 oz). Refer to Adhesives, Fluids, Lubricants, and Sealers Fluid Type Specifications for lubricant recommendation.

4. Clean the fill plug.

5. Install the fill plug and tighten to 39 Nm (29 lb ft).

6. Lower the vehicle.