Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)
    Fig 1: View Of ECT Sensor
    GM1836047Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the ECT sensor.

    Tighten 

    Tighten the sensor to 22 N.m (16 lb ft).

    2. Fig 2: Identifying Engine Wiring Harness Electrical Connector
    GM1858010Courtesy of GENERAL MOTORS COMPANY
  2. Connect the engine wiring harness electrical connector (8) to the ECT sensor (9).
  3. Slide the electrical connector heat shield down over the connector.
  4. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) , Cooling System Draining and Filling (Vac N Fill) .
scientia non olet · About Brad's Car Manuals