Vehicle Speed Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Vehicle Speed Sensor Replacement

Removal Procedure

1. Disconnect the speedometer speed sensor electrical connector.

2. Remove the speedometer housing retaining bolt (2).

3. Remove the speedometer-driven gear (1).

Installation Procedure

1. Coat the O-ring with transmission fluid.

2. Install the speedometer-driven gear (1).

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the speedometer housing retaining bolt (2) and tighten to 4 Nm (35 lb in).

4. Connect the speedometer speed sensor electrical connector.