Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2014 >> Volt >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Brake Control Brake Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Align the locating pin on the brake control brake pedal position sensor (1) to the hole on the brake pedal assembly bracket.
    Fig 1: Brake Control Brake Pedal Position Sensor
    GM2634921Courtesy of GENERAL MOTORS COMPANY
  2. Ensure the brake control brake pedal position sensor fork is properly located on the brake pedal pin.
  3. Install the brake control brake pedal position sensor bolt (1) and tighten to 9 N.m (80 lb in).
    Fig 2: Brake Control Brake Pedal Position Sensor Bolt
    GM2634918Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  4. Connect the brake control brake pedal position sensor electrical connector.
  5. Perform the Brake Control Brake Pedal Position Sensor Calibration .
scientia non olet · About Brad's Car Manuals