Keyless Entry Control Module Bracket Replacement

Fig 1: Keyless Entry Control Module Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the quarter lower rear trim panel - left side. Refer to Quarter Lower Rear Trim Panel Replacement (Left Side, Standard Wheelbase)Quarter Lower Rear Trim Panel Replacement (Right Side, Standard Wheelbase)Quarter Lower Rear Trim Panel Replacement (Left Side, Extended Wheelbase)Quarter Lower Rear Trim Panel Replacement (Right Side, Extended Wheelbase) .
1	Keyless Entry Control Module Bracket Fasteners (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Keyless Entry Control Module Bracket Procedure Disconnect the electrical connections. Transfer components as necessary.

Callout

Component Name

Keyless Entry Control Module Bracket Fasteners (Qty: 2)

CAUTION:

Tighten
9 N.m (80 lb in)

Keyless Entry Control Module Bracket

Procedure