Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2017 >> SS Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LS3) >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: Generator & Mounting Fasteners
    GM3273792Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the generator (2) to the generator mounting bracket and tighten the mounting fasteners (1) to 58 N.m (43 lb ft).
  2. Fig 2: Generator Mounting Components
    GM3273796Courtesy of GENERAL MOTORS COMPANY
  3. Install the battery positive cable to the B + stud at the back of the generator and tighten the fastener (1) to 10 N.m (89 lb in).
  4. Install the terminal boot (2) and connect the electrical connector (3).
  5. Install the rear generator brace (4) to the back of the generator and tighten the fastener (5) to 58 N.m (43 lb ft).
  6. Install the accessory drive belt to the generator. Refer to Drive Belt Replacement - Accessory .
  7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .