Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Inside Rearview Mirror Fastener | 1.8 N.m (16 lb/in) |
| Outside Rearview Mirror Applique Screw | 0.8 N.m (7 lb/in) |
| Outside Rearview Mirror Fastener | 9 N.m (80 lb/in) |
| Outside Rearview Mirror Housing Cover Bezel Screw | 0.8 N.m (7 lb/in) |
| Outside Rearview Mirror Housing Lower Cover Screw | 0.5 N.m (4 lb/in) |
| Outside Rearview Mirror Inner Actuator Fastener | 1 N.m (9 lb/in) |