Collision Repair Specifications: Notes

This information provides repair specifications for Collision repair.

• Welds mentioned in text and shown in graphics are accurate at the time of publication. Use vehicle being repaired for accurate count and location. If count and location of welds cannot be determined, refer to Service information (SI).
• Welds shown in SI are for location and count. Removal and installation steps will vary depending on single, multi panel replacement, repair, and accessibility. Follow the below steps for removal and installation of welds, structural adhesive (purple), and structural rivets.
• Spot, MIG/MAG welds and structural rivets with 3 or 4 metals stacked up can be completed simultaneously when all panels or components are present.