Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 1983 >> Imperial >> Repair and Diagnosis >> Engine Performance >> Ignition System - V8 >> Overhaul >> Disassembly

Ignition System - V8: Overhaul: Disassembly

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove distributor cap. Using 2 screwdrivers, pry off rotor from shaft. Remove reluctor by prying up from bottom of reluctor using 2 pry bars or screwdrivers with a maximum width of 7/16". Be careful not to distort or damage reluctor teeth.
  2. Remove 2 screws and lock washers attaching plate to housing, and lift out plate and pick-up coil(s) as an assembly. DO NOT  attempt to remove distributor cap clamps, as they are peened in place.
  3. If distributor has more than .006" (.15 mm) shaft side play, replace housing shaft and reluctor sleeve by removing shaft retaining pin and sliding retainer off end of shaft.
scientia non olet · About Brad's Car Manuals