Ignition System - V8: Overhaul: Reassembly

Fig 1: Exploded View of 5.2L ESC Distributor Models with EFI use a single pick-up coil.

Inspect all bearing surfaces and pivot pins for roughness, binding, or looseness. Lubricate and install upper thrust washer on shaft and slide shaft into distributor housing.
Install distributor shaft retainer and pin (5.2L engines). Install lower plate, upper plate, and pick-up coil(s) as an assembly.
Position reluctor keeper pin into place on reluctor sleeve and firmly press reluctor into place. Make sure keeper pin is in place. Lubricate felt pad in top of reluctor sleeve and install rotor and cap.