Starter Specifications
STARTER SPECIFICATIONS - DIRECT DRIVE
| Application |
Specification |
| Number Of Teeth |
8 |
| Rated Output At 12 Volts |
.95 Kw |
STARTER SPECIFICATIONS - REDUCTION GEAR
| Application |
Specification |
| Carbon Brush Minimum Length |
|
| Commutator |
| Diameter |
| Standard |
1.158" (29.4 mm) |
| Minimum |
1.118" (28.4 mm) |
| Mica Undercut Depth |
.020" (0.5 mm) |
| Runout |
| Standard |
.002" (.05 mm) |
| Maximum |
.004" (.10 mm) |
| No-Load Test At 11 Volts |
| Maximum Amps |
90 |
| Minimum RPM |
3000 |
| Number Of Teeth |
10 |
| Pinion Gap |
.020-.079" (0.5-2.0 mm) |
| Rated Output At 12 Volts |
| Canada |
1.4 Kw |
| US |
1.2 Kw |