Power Mirror Switch Test

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Remove power mirror switch from mounting. Disconnect wiring harness at switch connector. Using an ohmmeter, check continuity between power mirror switch terminals with the switch in the appropriate position(s). See the POWER MIRROR SWITCH CONTINUITY TEST . See Figure. If results differ from table, replace switch.

POWER MIRROR SWITCH CONTINUITY TEST

Mirror Selector Position	Mirror Angle	Continuity Between Pins No.
"L" (Left)	Up	2 & 4; 4 & 7; 8 & 10
"L" (Left)	Down	2 & 8; 4 & 10; 7 & 8
"L" (Left)	Left	3 & 4; 4 & 9; 8 & 10
"L" (Left)	Right	3 & 8; 4 & 10; 8 & 9
"R" (Right)	Up	1 & 8; 2 & 4; 4 & 7
"R" (Right)	Down	1 & 4; 2 & 8; 7 & 8
"R" (Right)	Left	1 & 8; 3 & 4; 4 & 9
"R" (Right)	Right	1 & 4; 3 & 8; 8 & 9