Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Electrically Heated Systems >> Driver Thermistor Out Of Range High

Driver Thermistor Out Of Range High

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn ignition off. Disconnect driver's heated seat cushion harness connector. Turn ignition on. Turn driver's seat heater on. Measure voltage at terminal "D" (Black/Dark Green wire) at driver's heated seat cushion harness connector. See Figure . If voltage is greater than 5.5 volts, go to next step. If voltage is 5.5 volts or less, go to step  3 .
  2. Turn ignition off. Disconnect Memory Heated Seat/Mirror Module (MHSMM) harness connector C2. Turn ignition on. Measure voltage at terminal "D" (Black/Dark Green wire) at driver's heated seat cushion harness connector. If no voltage exists, replace MHSMM. If any voltage exists, repair short to voltage in Black/Dark Green wire between driver's heated seat cushion and MHSMM.
  3. Turn ignition off. Disconnect Memory Heated Seat/Mirror Module (MHSMM) harness connector C1. Turn ignition on. Measure voltage at terminal "C" (Tan/Light Blue wire) at driver's heated seat cushion harness connector. If no voltage exists, replace driver's heated seat cushion. If any voltage exists, repair short to voltage in Tan/Light Blue wire between driver's heated seat cushion and MHSMM.
scientia non olet · About Brad's Car Manuals