Tire Pressure Verification Test

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Using a scan tool or the EVIC RESET button, set the EVIC to Diagnostics mode (blank screen).
Set to EVIC as follows, press and hold the EVIC RESET button for 5 seconds (EVIC will beep). Set the EVIC to display BLOCK COUNTERS.
A vehicle graphic will display showing counters at wheel locations.
Drive vehicle at 25 MPH (40 KM/H) for at least 2 minutes.
Observe that the counters increment at least 3 sensor/transmitter receptions for each wheel. Can the EVIC be trained and do the counters show Sensor/Transmitter receptions? If yes, repair is complete. If no, see DIAGNOSTIC TROUBLE CODE IDENTIFICATION table under SELF-DIAGNOSTIC SYSTEM.