Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2001 >> Prowler >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Ignition Control System >> Knock Sensor >> Installation

Knock Sensor: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install knock sensor. Tighten bolt to 10 N.m (7 ft. lbs.) torque. Over or under tightening affects knock sensor performance, possibly causing improper spark control.
  2. Attach electrical connector to knock sensor.
  3. Install intake manifold plenum and intake manifold. (see INTAKE MANIFOLD under REMOVAL & INSTALLATION in 3.5L V6 ENGINE article.
scientia non olet · About Brad's Car Manuals