Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - Automatic Transmission >> Speed Sensor - Input >> Installation

Speed Sensor - Input: Installation

Download the full database via torrent (~1.1 TB)
  1. Verify o-ring is installed into position. See Figure.
  2. Install and tighten input speed sensor to 27 N.m (20 ft. lbs.) torque.
  3. Connect speed sensor connector. See Figure.
  4. Connect battery negative cable.
scientia non olet · About Brad's Car Manuals