Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2002 >> Neon LE, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmissions >> Solenoid/Pressure Switch Assembly >> Installation

Solenoid/Pressure Switch Assembly: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
NOTE: If solenoid/pressure switch assembly is being replaced, it is necessary to perform the TCM Quick Learn Procedure. Refer to DIAGNOSIS - 41TE article.
  1. Install solenoid/pressure switch assembly and new gasket to transaxle. (Fig 1).
    Fig 1: Installing Solenoid/Pressure Switch Assembly & Gasket
    G01031274Courtesy of DAIMLERCHRYSLER CORP.
  2. Install and torque three (3) bolts (Figure) to 13 N.m (110 in. lbs.).
  3. Install input speed sensor (Figure) and torque to 27 N.m (20 ft. lbs.).
  4. Connect input speed sensor connector.
  5. Install solenoid/pressure switch 8-way connector and torque to 4 N.m (35 in. lbs.).
  6. Install air cleaner/throttle body assembly.
  7. Connect battery negative cable.
  8. If solenoid/pressure switch assembly was replaced, perform TCM Quick Learn procedure. Refer to DIAGNOSIS - 41TE article.
scientia non olet · About Brad's Car Manuals