Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2002 >> Prowler >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control System >> Knock Sensor >> Installation

Knock Sensor: Installation

Download the full database via torrent (~1.1 TB)
  1. Install knock sensor. Tighten bolt to 10 N.m (7 ft. lbs.) torque. Over or under tightening affects knock sensor performance, possibly causing improper spark control. 
  2. Attach electrical connector to knock sensor.
  3. Install intake manifold plenum and intake manifold. Refer to the ENGINE .
scientia non olet · About Brad's Car Manuals