Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2002 >> Prowler >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel Injection System >> Accelerator Pedal >> Installation

Accelerator Pedal: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Position accelerator pedal assembly to floor pan. Install mounting nuts and tighten to 12 N.m (105 in. lbs.) torque.
  2. From inside the vehicle, hold up the pedal and install the throttle cable and cable retainer in the upper end of the pedal shaft.
  3. From the engine compartment, hold the throttle body lever in the wide open position and install the throttle cable.
scientia non olet · About Brad's Car Manuals