Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2003 >> Intrepid (CANADA) V6-2.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair

Camshaft Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches


Removal-2.7L

The camshaft position sensor is mounted in the front of the head.

1. Disconnect electrical connector from sensor.

2. Remove camshaft position sensor screw.

3. Without pulling on the connector, pull the sensor out of the chain case cover.

Installation-2.7L

1. Install sensor in the chain case cover and push sensor in until contact is made with the boss on the head. While holding the sensor in this position, install and tighten the retaining bolt to 12 Nm (105 in. lbs) torque.

2. Attach electrical connector to sensor.