Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2003 >> Voyager Base, 3.3 R >> Repair and Diagnosis >> Engine Performance >> System >> Ignition Control System >> Ignition Coil >> Installation >> Installation - 2.4L

Installation - 2.4L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install ignition coil and heat shield to valve cover and tighten bolts.
  2. Connect the electrical connector to the ignition coil.
  3. Transfer spark plug cables to new coil pack. The coil pack towers are numbered with the cylinder identification. Be sure the ignition cables are fully seated onto the towers.
  4. Connect the negative battery cable.
scientia non olet · About Brad's Car Manuals