Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2004 >> Crossfire Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Knock Sensor >> Installation

Knock Sensor: Installation

Download the full database via torrent (~1.1 TB)
  1. Position the knock sensors (1) on the engine block.
    2. NOTE: The knock sensor bolt torque is higher than other sensors. If the proper torque is not applied to the knock sensor, driveability can be affected.
  2. Install the retaining bolts. Tighten the bolts to 20 N.m (15 ft. lbs.).
  3. Connect the wire harness connectors.
  4. Install the intake manifold. See 3.2L V6 article.
scientia non olet · About Brad's Car Manuals