Sentry Key Antenna Ring

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REMOVAL

1. Remove the instrument cluster.

2. Disconnect the sentry key antenna ring electrical connector (1) from the sentry key remote entry module (2).

NOTE: Pay attention to harness routing for proper installation.

3. Pull to remove the sentry key antenna ring (1) from the ignition switch key cylinder (2).

INSTALLATION

1. Install the sentry key antenna ring (1) to the ignition switch key cylinder (2).

2. Install the sentry key antenna ring electrical connector (1) to the sentry key remote entry module (2).
3. Install the instrument cluster.