Instrument Cluster: Odometer: Removal

The instrument cluster must be removed for Odometer service. Refer to INSTRUMENT CLUSTER  :

On Intrepid, Concorde, and 300M  models, the odometer and PRNDL are one assembly retained by three screws.

1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove instrument cluster from vehicle. Refer to INSTRUMENT CLUSTER  .
3. Remove five cluster back cover retaining screws and remove the cover.
4. Unplug connectors from printed circuit board.
5. Remove cluster mask/lens from instrument cluster. Refer to .
6. Remove two screws to Vacuum Fluorescent (VF) display Odometer and remove from cluster.