Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery Cables >> Installation

Battery Cables: Installation

Download the full database via torrent (~1.1 TB)  |  Custom patches
  1. Position the battery cable in the vehicle.
  2. One at a time, trace and install the battery cable, retaining fasteners and routing clips until the desired cable is properly installed in the engine wire harness assembly.
  3. Install the tape on the engine wire harness assembly.
  4. Connect the positive battery cable terminal. Torque to 40 in. lbs.
  5. Connect the negative battery cable terminal. Torque to 40 in. lbs.
scientia non olet · About Brad's Car Manuals