Sensor-Manifold Absolute Pressure: Removal: 5.7L

Fig 1: MAP SENSOR LOCATION 5.7L

Courtesy of DAIMLERCHRYSLER CORP.

The Manifold Absolute Pressure (MAP) sensor (3) is mounted into the top/rear of the intake manifold (4) near the cowl/hood seal (1).

Fig 2: REMOVE/INSTALL 5.7L MAP SENSOR

Courtesy of DAIMLERCHRYSLER CORP.

1. Disconnect electrical connector at sensor by sliding release lock out (1). Press down on lock tab (2) for removal.
2. Rotate sensor 1/4 turn counter-clockwise for removal.
3. Check condition of sensor o-ring.