Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Relay Control Module >> Installation

Relay Control Module: Installation

Download the full database via torrent (~1.1 TB)
Fig 1: Locating Clip
GC0035892Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the relay control module harness connectors to the relay control module (1).
  2. Install the relay control module into the control module box, pushing the relay control module down until the clips snap into place.
  3. Install the control module box lid.
  4. Connect the negative battery cable.
scientia non olet · About Brad's Car Manuals