Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> UNDERHOOD Accessory Fuse Block >> Installation

UNDERHOOD Accessory Fuse Block: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Locating Releasing Tabs
GC0035893Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the harness connectors to the underhood accessory fuse block.
  2. Push the underhood accessory fuse block down into the box until the rear tabs and the front two tabs (1) connect.
  3. Install the lid.
  4. Connect the negative battery cable.
scientia non olet · About Brad's Car Manuals