Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Muffler >> Installation >> Notes

Exhaust System: Muffler: Installation: Notes

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Prying/Position Rubber Exhaust Hangers Off Of Bracket
GC0032297Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the muffler section in the rubber exhaust hangers (1).
    Fig 2: Removing/Installing Bolts From Center Connection Flange
    GC0032294Courtesy of DAIMLERCHRYSLER CORP.
  2. Install the bolts in the center exhaust flange (2). Tighten the bolts to 20 N.m (15 ft. lbs.).
    Fig 3: Disconnecting/Connecting Ground Strap At Muffler
    GC0032295Courtesy of DAIMLERCHRYSLER CORP.
  3. Connect the ground strap (1) at the muffler and tail pipe. Tighten the ground strap bolt to 10 N.m (89 in. lbs.).
  4. Remove the support.
  5. Install the rear support bracket (Convertible only). (Refer to FRAME & BUMPERS/FRAME/BRACKET - INSTALLATION) .
  6. Lower the vehicle.
scientia non olet · About Brad's Car Manuals