Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System (Service Information) >> Knock Sensor >> Removal

Knock Sensor: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Disconnecting/Connecting Wire Harness Connectors At Knock Sensors
GC0035095Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the intake manifold from the engine. (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) for 3.2L - Service Information or (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) for 3.2L SRT - Service Information .
  2. Disconnect the wire harness connectors at the knock sensors (1).
  3. Remove the retaining bolts.
  4. Remove the knock sensors from the engine block.
scientia non olet · About Brad's Car Manuals