Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Knock Sensor >> Installation >> Installation - 1.6L

Installation - 1.6L

Download the full database via torrent (~1.1 TB)  |  Custom patches
  1. Install the knock sensor Tighten knock sensor bolt to 22 N.m (195 in. lbs.) torque. See Figure.Over or under tightening effects knock sensor performance resulting in possible improper spark control.  .
  2. Connect the electrical connector for the sensor. See Figure.
  3. Connect the negative battery cable.
  4. Install air cleaner assembly cover.
scientia non olet · About Brad's Car Manuals