Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Crankshaft Position Sensor >> Installation >> 3.8L

Crankshaft Position Sensor: Installation: 3.8L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install sensor and push sensor down until contact is made with the transmission case. See Fig 1. While holding the sensor in this position, install and tighten the retaining bolt to 12 N.m (105 in. lbs.) torque.
    Fig 1: Crankshaft Position Sensor - 3.8L
    GC0000449Courtesy of DAIMLERCHRYSLER CORP.
  2. Connect electrical connector and lock to crankshaft position sensor.
  3. Install battery.
  4. Connect the positive then the negative battery cable.
scientia non olet · About Brad's Car Manuals