Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery >> Fuel Pump Module >> Installation

Fuel Pump Module: Installation

Download the full database via torrent (~1.1 TB)
  1. Wipe seal area of tank clean and place a new seal in position in the tank opening.
  2. Position fuel pump in the tank.
  3. Position the lock ring over the fuel pump module.
  4. Tighten the lock ring using a brass punch and hammer.
  5. Connect the electrical connector.
  6. Connect the fuel line to the fuel pump.
  7. Install the fuel tank, refer to INSTALLATION .
  8. Lower vehicle.
  9. Connect the battery cable.
  10. Fill fuel tank. Use the DRB III® scan tool to pressurize the fuel system. Check for leaks.
scientia non olet · About Brad's Car Manuals