Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2007 >> Aspen 2WD V8-4.7L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Control Module >> Service and Repair >> Module-Heated Seat >> Removal

Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches





REMOVAL





1. Disconnect and isolate the battery negative cable.

2. Open the liftgate and remove the upper D-pillar trim from the vehicle.

3. Remove the lower D-pillar trim from the vehicle.

4. Disconnect the wire harness connector from the back of the heated seat module (2).

5. Unsnap the heated seat module (2) from the D-pillar (1).

6. Remove the heated seat module (2) from the vehicle.