Front Blower Motor Power Module - Installation

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSTALLATION

1. Position the blower motor power module (2) into the front HVAC housing (4).

2. Install the two screws (3) that secure the blower motor power module to the front HVAC housing. Tighten the screws to 2 Nm (17 in. lbs.).

3. Connect the two wire harness connectors (1) to the blower motor power module.

4. If equipped with a trim cover (2), install the trim cover over the blower motor power module (3) and install the two retaining screws (1). Tighten the screws to 2 Nm (17 in. lbs.).

5. Reconnect the negative battery cable.