Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> O2 Sensor >> Removal >> Downstream Oxygen Sensor

Downstream Oxygen Sensor

Download the full database via torrent (~1.1 TB)
Fig 1: Removing/Installing Downstream O2 Sensor
GC0032361Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
    NOTE: The left side O2 sensor is shown in the illustration. The right side is similar.
  2. Raise and support the vehicle.
  3. Disconnect the O2 sensor harness connector.
  4. Remove the O2 sensor (1).
scientia non olet · About Brad's Car Manuals