Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Ignition Control >> Spark Plug >> Removal >> Spark Plug-2.7L

Spark Plug-2.7L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
NOTE: Always remove the ignition coil assembly by turning the assembly 1/2 turn and pulling straight back in a steady motion.
  1. Disconnect the negative battery cable.
  2. Remove the intake manifold. Refer to appropriate Engine SERVICE INFORMATION article.
    CAUTION: Prior to removing the ignition coils, spray compressed air around the coils and spark plugs. If dirt and debris enter the engine, this may cause internal engine damage.
  3. Remove the ignition coils.
  4. Remove the spark plugs.
scientia non olet · About Brad's Car Manuals