Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2007 >> Sebring Sedan V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair >> Installation

Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches





3.5L





1. Install knock sensor. Tighten knock sensor to 20 Nm (15.2 in. lbs.) torque. Over or under tightening effects knock sensor performance, possibly causing improper spark control.

2. Route the knock sensor wire in the proper location .

3. Install the upper intake manifold.





4. Connect the electrical connector .

5. Connect the negative battery cable.