Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2008 >> Aspen 2WD V8-4.7L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> System Specifications

System Specifications

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches






SPECIFICATIONS - 4.7L ENGINE


































CRANKSHAFT MAIN BEARING SELECTION

NOTE: Service main bearings are coded. These codes identify what size (grade) the bearing is.






Main bearing Cap Torque and Sequence






NOTE: Lubricate the bedplate retaining bolts with clean engine oil prior to installation.

Install the bedplate retaining bolts, making sure to place the stud bolts in the correct location, Torque the bolts in the sequence shown.
- Tighten bolts A - L to 54 Nm (40 ft. lbs.)
- Tighten bolts 1-10 to 2.8 Nm (25 in. lbs.)
- Turn bolts 1-10 an additional 90°.
- Tighten bolts A1- A6 to 27 Nm (20 ft. lbs.)

Crankshaft Pulley Torque