Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> HEATER, Engine Block >> Installation >> 5.7L

HEATER, Engine Block: Installation: 5.7L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Heater, Exhaust And Bolt
GC0143810Courtesy of CHRYSLER LLC
  1. Thoroughly clean the cylinder block core hole and the block heater seat.
  2. Insert the block heater assembly (1) into the block.
  3. With the block heater fully seated, tighten bolt (1) to 2 N.m (17 in. lbs.).
  4. If equipped, install lower engine cover.
  5. Lower vehicle.
scientia non olet · About Brad's Car Manuals