Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> HEATER, Engine Block >> Removal >> 3.6L

HEATER, Engine Block: Removal: 3.6L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: 3.6L Engine Block Heater & Cylinder Block
GC0144482Courtesy of CHRYSLER LLC
  1. Raise vehicle on hoist.
  2. Remove the A/C compressor. Refer to COMPRESSOR, A/C, Removal .
  3. Detach power cord plug from block heater (1).
  4. Remove block heater attaching screw located below heater terminals.
  5. Remove block heater from cylinder block (2).