Totally Integrated Power Module (TIPM) - Removal

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REMOVAL

1. Disconnect and isolate the negative battery cable.
2. Release the Totally Integrated Power Module (TIPM) cover retaining clips and open the TIPM cover (1).
3. Depress the mounting clips (2) to disengage and remove the TIPM housing (3) from its mounting bracket.

4. Access the bottom of the TIPM.
5. Remove the TIPM B+ cable retainer (1).
6. Remove the B+ cable (2) from the TIPM stud (3).
7. Disconnect the harness connectors from the bottom of the TIPM.
8. Remove the TIPM from the vehicle.