Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater, Engine Block >> Installation >> 3.6L

Heater, Engine Block: Installation: 3.6L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: 3.6L Engine Block Heater & Cylinder Block
GC0144482Courtesy of CHRYSLER GROUP, LLC
  1. Clean block core hole and heater seat.
  2. Insert heater block (1) assembly.
  3. With block heater seated, tighten screw (2) to 12 N.m (106 in.lbs.) to assure a positive seal.
  4. Install power cord plug to block heater (1).
    Fig 2: A/C Compressor & Fasteners
    GC0145963Courtesy of CHRYSLER GROUP, LLC
  5. Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .
scientia non olet · About Brad's Car Manuals