Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 3.6L

Sensor, Coolant Temperature: Installation: 3.6L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Fig 1: Engine Coolant Temperature (ECT) Sensor
GC0144465Courtesy of CHRYSLER GROUP, LLC
  1. Apply Mopar® thread sealant with PFTE part number 04318034 to sensor threads.
  2. Install the sensor (1) to the cylinder head. Tighten sensor to 11 N.m (8 ft. lbs.).
  3. Connect the electrical connector to sensor.
  4. If removed, install the belly pan.
  5. Lower the vehicle.
  6. Replace any lost engine coolant. Refer to STANDARD PROCEDURE .
scientia non olet · About Brad's Car Manuals