Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Dodge and Ram >> 2004 >> Neon SXT, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection >> Throttle Control Cable >> Installation >> Installation

Throttle Control Cable: Installation: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install grommet into dashpanel.
  2. From the engine compartment, push the housing end fitting into the dashpanel grommet.
  3. From the engine compartment, rotate the throttle lever forward to the wide open position and install cable clasp (Figure).
  4. Install cable housing (throttle body end) into the cable mounting bracket on the engine.
  5. Install throttle cable cover.
  6. From inside the vehicle, hold up pedal and feed throttle cable core wire through hole in upper end of the pedal shaft. Install cable retainer (Figure).
  7. Install cable retainer clip (Figure).