Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Dodge and Ram >> 2004 >> SRT-4 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Knock Sensor >> Installation >> Installation - 1.6L

Installation - 1.6L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install the sensor (Figure ).
  2. Install knock sensor (Figure ). Tighten knock sensor bolt to 22 N.m (195 in. lbs.) torque. Over or under tightening effects knock sensor performance resulting in possible improper spark control. 
  3. Locate the electrical connector (Figure ).
  4. Connect the heretical connector (Figure ).
  5. Install the fuel rail cover (Figure ).
  6. Connect the negative battery cable.
scientia non olet · About Brad's Car Manuals