Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Eagle >> 1990 >> Summit Base, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Testing >> Fluid Pressure

Fluid Pressure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
CAUTION: DO NOT  leave valve on pressure gauge closed more than 10 seconds or damage to oil pump will result.
  1. Disconnect pressure hose from oil pump. See Fig 1 . Bleed air from system. See HYDRAULIC SYSTEM BLEEDING  in this article. Start engine and let it idle. Turn steering wheel several times until temperature reaches 122°F (50°C). Set engine idle speed to 1000 RPM.
    Fig 1: Connecting Pressure Gauge & Shut-Off Valve
    G52831Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
  2. Close and open the valve to measure oil pump pressure. If not within specifications, replace power steering pump. Refer to the OIL PUMP PRESSURE SPECIFICATIONS  table. Install pressure hose. Bleed system.
OIL PUMP PRESSURE SPECIFICATIONS

Application psi (kg/cm2 )
Colt, Colt Wagon, Colt 200 & Summit
Valve Closed 780-880 (55-62)
Valve Open (Maximum) 142 (10)
Colt Vista
Valve Closed
2WD 780-880 (55-62)
4WD 920-1000 (65-72)
Valve Open (Maximum) 142 (10)