Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Eagle >> 1990 >> Talon Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> Engine Sensors & Switches >> Idle Position Switch (2.0L)

Idle Position Switch (2.0L)

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. On 2.0L, idle position switch is located on throttle body. Disconnect Throttle Position Sensor (TPS) connector. Using an ohmmeter, check continuity between TPS terminal No. 1 and ground. See Fig 1 .
  2. With accelerator pedal depressed, no continuity should exist. With accelerator pedal released, continuity should exist. Replace idle position switch if it does not test as specified.
    Fig 1: Throttle Position Switch Terminal Identification (2.0L)
    G90J06285Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About Brad's Car Manuals