Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Fiat >> 2017 >> 500L Pop >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation

Sensor, Coolant Temperature: Installation

Download the full database via torrent (~1.1 TB)
GC0152369Courtesy of CHRYSLER GROUP, LLC
  1. Install the engine coolant temperature sensor (4) into the thermostat housing.
  2. Connect the wire harness connector.
    GC0152380Courtesy of CHRYSLER GROUP, LLC
  3. Install the battery (4) and the hold down clamp. Tighten the nut to 55 Nm (40 lbf-ft).
  4. Install the air intake assembly.
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
  6. Connect the positive and negative battery cable.
scientia non olet · About Brad's Car Manuals